Figure 6-34-38

Mistake-Proofing the Design of Health Care Processes -

Figure 6.34. In addition to the gauge on the railing, the label is mounted to indicate to nurses whether or not the bed is situated at the correct angle

Photograph of label mounted on bed to aid determination of bed's angle of elevation. In addition to the gauge on the railing, the label is mounted to indicate to nurses whether or not the bed is situated at the correct angle.

Return to Document

Figure 6.35. The label on this bed is mounted at 30° so that it is level when the bed is at the correct angle

Photograph of label mounted on bed to aid determination of bed's angle of elevation. The label on this bed is mounted at 30 degrees so that it is level when the bed is at the correct angle.

Return to Document

Current as of May 2007

Internet Citation: Figure 6-34-38: Mistake-Proofing the Design of Health Care Processes -. May 2007. Agency for Healthcare Research and Quality, Rockville, MD. http://www.ahrq.gov/professionals/quality-patient-safety/patient-safety-resources/resources/mistakeproof/mistakefig6-34-38.html

Figure 6-34-38

Mistake-Proofing the Design of Health Care Processes -

Figure 6.34. In addition to the gauge on the railing, the label is mounted to indicate to nurses whether or not the bed is situated at the correct angle

Figure 6.35. The label on this bed is mounted at 30° so that it is level when the bed is at the correct angle

Figure 6.36. A vibrator bowl label with the vibrator turned off

Figure 6.37. A vibrator bowl label with the vibrator turned on

Figure 6.38. Vibrator bowl